![]() ![]() These scanners will scan your network and show all devices connected to the network. If the discovery tool won't work for you, you can download from the internet a free IP scanner such as "Angry IP" or "Advanced IP Scanner". You can find the Discovery tool for your model at on the Support page. Tycon offers a free Discovery tool that will help you find the unit's IP Address on your network. Always cycle the power on the unit closest to the router first, wait two minutes and then power cycle the remote unit. Please note that the units will only attempt to get an IP address via DHCP upon power-up, so a power cycle will solve most problems with DHCP. If the DHCP server is not available, the EZ-Bridge ® will default to 192.168.1.139 and 192.168.1.239. What this means is the EZ-Bridge will get it's IP address from your router, if available. The EZ-Bridge ® comes with DHCP enabled at the factory. In order to access the web control panel, the computer IP address must be on the same subnet as the EZ-Bridge ® IP address. The EZ-Bridge ® has an embedded web control panel which is accessible via any web browser. ![]() If you can't find the user guide, you can download the latest user guide on the product pages on : ![]() If you want to change settings for any reason, you should refer to the user guide that came with the unit. ![]() If the units are installed and powered up, they will automatically bridge the networks. The EZ-Bridge ® comes from the factory programmed to be plug and play. You will only be able to see networked devices on the same network. It will also block Windows network discovery of printers and folders across the bridge. The discovery tool uses ports 67 and 68 for discovering the units. *** Note *** Blocking ports 67 and 68 will block the discovery tool, meaning it will not see the unit on the other side of the bridge. On the two EZ-Bridge ® Ultra, you will need to set up a firewall to drop packets on wireless LAN UDP Port 67 and UDP Port 68.Ģ nd Configuration Mode: Select “Advanced”ģ rd Expand Firewall and select “Enable” and Select “Drop”, IP Type: UDP, Port: 67 & 68 twice. It is necessary to block the DHCP so the Local router and Remote router will not give IP addresses across the wireless bridge.ģ. You can have an EZ-Bridge ® Ultra connecting a network at the Local side with a network at the Remote side, using two routers, one router (Local) and one Router (Remote). It is possible to have two separate networks connected through the EZ-Bridge ® Ultraġ. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. Archives
December 2022
Categories |